发布信息当前位置: 首页 » 供应 » 辅助设备 » 剪脚机成型机 »

EBSO EBSOMAT 400 Axial Trimmer/Former

点击图片查看原图
单价: 面议
起订:
供货总量:
发货期限: 自买家付款之日起 3 天内发货
所在地: 上海
有效期至: 长期有效
最后更新: 2019-08-13 05:02
浏览次数: 0
询价
公司基本资料信息






 
 
产品详细说明
Manual-Model
This new progressive and universal to use machine is suited for the processing of axial components. Through manual operation it is possible to read a production-speed of circa 10.000 components per hour
Motor-Drive
For treating even more components the EBSOMAT 400 can be fitted with a motor-drive. Therewith you are able to increase the capacity on 14.000 compon¬ents per hour.
• No mechanical stress of components due to interchangeable cutting, bending and forming
• Gradual adjusting of the cutting units realizes an „overbending“ of the wire-components by more than 90° respectly 180°
• The bending components are supplied with a special roller design, so that the components can not be damaged by overbending
• Pitches and length of the connecting wires can be adjusted gradually
• Already the standard tooling allows the processing of the components either in horizontal or vertical mode
• Gradual adjusting of speed

Loose Feed Option:
- Components are automatically aligned, separated and moved into the transport mechanism for processing.
- Easy to set up and operate.
- Simple walking-beam design is open and accessible.
- Up to 3.000 pc/h

Stand Option includes:
- Sturdy welded square tube construction.
- Attachments for scrap deflectors and bins.
- Collection bag for scrap, tape and clippings.
- Slide out shelf for Operator convenience.
- Shelf for tooling and accessories.

Technical Data
Length: 500 mm
Width: 300 mm
Height: 400 mm
Weight: 28 kg
Pitches: 7,5 – 47 mm
Diameter: 0,4 – 0,8 mm
Option: 0,9 – 1,0 mm
Motor-driven
Connection: 220V/5OHz
Electronic preset: 99.999 pieces

0条 [查看全部]  相关评论
 
更多»本企业其它产品

[ 供应搜索 ]  [ 加入收藏 ]  [ 告诉好友 ]  [ 打印本文 ]  [ 关闭窗口 ]

 
网站首页 | 注册指南 | 网站制作 | 关于我们 | 联系方式 | 使用协议 | 版权隐私 | 网站地图 | 排名推广 | 广告服务 | 积分换礼 | 网站留言 | RSS订阅 | 沪ICP备09033911号-6