价格:未填
品牌:EBSO
Manual-Model
This new progressive and universal to use machine is suited for the processing of axial components. Through manual operation it is possible to read a production-speed of circa 10.000 components per hour
Motor-Drive
For treating even more components the EBSOMAT 400 can be fitted with a motor-drive. Therewith you are able to increase the capacity on 14.000 compon¬ents per hour.
• No mechanical stress of components due to interchangeable cutting, bending and forming
• Gradual adjusting of the cutting units realizes an „overbending“ of the wire-components by more than 90° respectly 180°
• The bending components are supplied with a special roller design, so that the components can not be damaged by overbending
• Pitches and length of the connecting wires can be adjusted gradually
• Already the standard tooling allows the processing of the components either in horizontal or vertical mode
• Gradual adjusting of speed
Loose Feed Option:
- Components are automatically aligned, separated and moved into the transport mechanism for processing.
- Easy to set up and operate.
- Simple walking-beam design is open and accessible.
- Up to 3.000 pc/h
Stand Option includes:
- Sturdy welded square tube construction.
- Attachments for scrap deflectors and bins.
- Collection bag for scrap, tape and clippings.
- Slide out shelf for Operator convenience.
- Shelf for tooling and accessories.
Technical Data
Length: 500 mm
Width: 300 mm
Height: 400 mm
Weight: 28 kg
Pitches: 7,5 – 47 mm
Diameter: 0,4 – 0,8 mm
Option: 0,9 – 1,0 mm
Motor-driven
Connection: 220V/5OHz
Electronic preset: 99.999 pieces
